String interpolation / format inspired by Python's f-strings.

fmt vs. &

You can use either fmt or the unary & operator for formatting. The difference between them is subtle but important.

The fmt"{expr}" syntax is more aesthetically pleasing, but it hides a small gotcha. The string is a generalized raw string literal. This has some surprising effects:

Example:

import std/strformat
let msg = "hello"
assert fmt"{msg}\n" == "hello\\n"

Because the literal is a raw string literal, the \n is not interpreted as an escape sequence.

There are multiple ways to get around this, including the use of the & operator:

Example:

import std/strformat
let msg = "hello"

assert &"{msg}\n" == "hello\n"

assert fmt"{msg}{'\n'}" == "hello\n"
assert fmt("{msg}\n") == "hello\n"
assert "{msg}\n".fmt == "hello\n"

The choice of style is up to you.

Formatting strings

Example:

import std/strformat
assert &"""{"abc":>4}""" == " abc"
assert &"""{"abc":<4}""" == "abc "

Formatting floats

Example:

import std/strformat
assert fmt"{-12345:08}" == "-0012345"
assert fmt"{-1:3}" == " -1"
assert fmt"{-1:03}" == "-01"
assert fmt"{16:#X}" == "0x10"

assert fmt"{123.456}" == "123.456"
assert fmt"{123.456:>9.3f}" == "  123.456"
assert fmt"{123.456:9.3f}" == "  123.456"
assert fmt"{123.456:9.4f}" == " 123.4560"
assert fmt"{123.456:>9.0f}" == "     123."
assert fmt"{123.456:<9.4f}" == "123.4560 "

assert fmt"{123.456:e}" == "1.234560e+02"
assert fmt"{123.456:>13e}" == " 1.234560e+02"
assert fmt"{123.456:13e}" == " 1.234560e+02"

Expressions

Example:

import std/strformat
let x = 3.14
assert fmt"{(if x!=0: 1.0/x else: 0):.5}" == "0.31847"
assert fmt"""{(block:
    var res: string
    for i in 1..15:
      res.add (if i mod 15 == 0: "FizzBuzz"
        elif i mod 5 == 0: "Buzz"
        elif i mod 3 == 0: "Fizz"
        else: $i) & " "
    res)}""" == "1 2 Fizz 4 Buzz Fizz 7 8 Fizz Buzz 11 Fizz 13 14 FizzBuzz "

Debugging strings

fmt"{expr=}" expands to fmt"expr={expr}" namely the text of the expression, an equal sign and the results of evaluated expression.

Example:

import std/strformat
assert fmt"{123.456=}" == "123.456=123.456"
assert fmt"{123.456=:>9.3f}" == "123.456=  123.456"

let x = "hello"
assert fmt"{x=}" == "x=hello"
assert fmt"{x =}" == "x =hello"

let y = 3.1415926
assert fmt"{y=:.2f}" == fmt"y={y:.2f}"
assert fmt"{y=}" == fmt"y={y}"
assert fmt"{y = : <8}" == fmt"y = 3.14159 "

proc hello(a: string, b: float): int = 12
assert fmt"{hello(x, y) = }" == "hello(x, y) = 12"
assert fmt"{x.hello(y) = }" == "x.hello(y) = 12"
assert fmt"{hello x, y = }" == "hello x, y = 12"

Note that it is space sensitive:

Example:

import std/strformat
let x = "12"
assert fmt"{x=}" == "x=12"
assert fmt"{x =:}" == "x =12"
assert fmt"{x =}" == "x =12"
assert fmt"{x= :}" == "x= 12"
assert fmt"{x= }" == "x= 12"
assert fmt"{x = :}" == "x = 12"
assert fmt"{x = }" == "x = 12"
assert fmt"{x   =  :}" == "x   =  12"
assert fmt"{x   =  }" == "x   =  12"

Implementation details

An expression like &"{key} is {value:arg} {{z}}" is transformed into:

var temp = newStringOfCap(educatedCapGuess)
temp.formatValue(key, "")
temp.add(" is ")
temp.formatValue(value, arg)
temp.add(" {z}")
temp

Parts of the string that are enclosed in the curly braces are interpreted as Nim code. To escape a { or }, double it.

Within a curly expression, however, {, }, must be escaped with a backslash.

To enable evaluating Nim expressions within curlies, colons inside parentheses do not need to be escaped.

Example:

import std/strformat
let x = "hello"
assert fmt"""{ "\{(" & x & ")\}" }""" == "{(hello)}"
assert fmt"""{{({ x })}}""" == "{(hello)}"
assert fmt"""{ $(\{x:1,"world":2\}) }""" == """[("hello", 1), ("world", 2)]"""

& delegates most of the work to an open overloaded set of formatValue procs. The required signature for a type T that supports formatting is usually proc formatValue(result: var string; x: T; specifier: string).

The subexpression after the colon (arg in &"{key} is {value:arg} {{z}}") is optional. It will be passed as the last argument to formatValue. When the colon with the subexpression it is left out, an empty string will be taken instead.

For strings and numeric types the optional argument is a so-called "standard format specifier".

Standard format specifiers for strings, integers and floats

The general form of a standard format specifier is:

[[fill]align][sign][#][0][minimumwidth][.precision][type]

The square brackets [] indicate an optional element.

The optional align flag can be one of the following:

<

Forces the field to be left-aligned within the available space. (This is the default for strings.)

>

Forces the field to be right-aligned within the available space. (This is the default for numbers.)

^

Forces the field to be centered within the available space.

Note that unless a minimum field width is defined, the field width will always be the same size as the data to fill it, so that the alignment option has no meaning in this case.

The optional fill character defines the character to be used to pad the field to the minimum width. The fill character, if present, must be followed by an alignment flag.

The sign option is only valid for numeric types, and can be one of the following:

Sign	Meaning
+	Indicates that a sign should be used for both positive as well as negative numbers.
-	Indicates that a sign should be used only for negative numbers (this is the default behavior).
(space)	Indicates that a leading space should be used on positive numbers.

If the # character is present, integers use the 'alternate form' for formatting. This means that binary, octal and hexadecimal output will be prefixed with 0b, 0o and 0x, respectively.

width is a decimal integer defining the minimum field width. If not specified, then the field width will be determined by the content.

If the width field is preceded by a zero (0) character, this enables zero-padding.

The precision is a decimal number indicating how many digits should be displayed after the decimal point in a floating point conversion. For non-numeric types the field indicates the maximum field size - in other words, how many characters will be used from the field content. The precision is ignored for integer conversions.

Finally, the type determines how the data should be presented.

The available integer presentation types are:

Type	Result
b	Binary. Outputs the number in base 2.
d	Decimal Integer. Outputs the number in base 10.
o	Octal format. Outputs the number in base 8.
x	Hex format. Outputs the number in base 16, using lower-case letters for the digits above 9.
X	Hex format. Outputs the number in base 16, using uppercase letters for the digits above 9.
(None)	The same as d.

The available floating point presentation types are:

Type	Result
e	Exponent notation. Prints the number in scientific notation using the letter e to indicate the exponent.
E	Exponent notation. Same as e except it converts the number to uppercase.
f	Fixed point. Displays the number as a fixed-point number.
F	Fixed point. Same as f except it converts the number to uppercase.
g	General format. This prints the number as a fixed-point number, unless the number is too large, in which case it switches to e exponent notation.
G	General format. Same as g except it switches to E if the number gets to large.
(None)	Similar to g, except that it prints at least one digit after the decimal point.

Limitations

Because of the well defined order how templates and macros are expanded, strformat cannot expand template arguments:

template myTemplate(arg: untyped): untyped =
  echo "arg is: ", arg
  echo &"--- {arg} ---"

let x = "abc"
myTemplate(x)

First the template myTemplate is expanded, where every identifier arg is substituted with its argument. The arg inside the format string is not seen by this process, because it is part of a quoted string literal. It is not an identifier yet. Then the strformat macro creates the arg identifier from the string literal, an identifier that cannot be resolved anymore.

The workaround for this is to bind the template argument to a new local variable.

template myTemplate(arg: untyped): untyped =
  block:
    let arg1 {.inject.} = arg
    echo "arg is: ", arg1
    echo &"--- {arg1} ---"

The use of {.inject.} here is necessary again because of template expansion order and hygienic templates. But since we generally want to keep the hygiene of myTemplate, and we do not want arg1 to be injected into the context where myTemplate is expanded, everything is wrapped in a block.

Future directions

A curly expression with commas in it like {x, argA, argB} could be transformed to formatValue(result, x, argA, argB) in order to support formatters that do not need to parse a custom language within a custom language but instead prefer to use Nim's existing syntax. This would also help with readability, since there is only so much you can cram into single letter DSLs.